 CCNA培训 |
|
| CCNP培训 |
|
| CCIE直通车培训 |
|
| CCIP培训 |
|
| CCVP培训 |
|
| CCSP培训 |
|
| CCIE集中营培训 |
|
| windows server 2008培训 |
|
| Windows 7培训 |
|
| SQL Server 2008培训 |
|
| Windows Server 2003培训 |
|
| RHCSA培训 |
|
| RHCE培训 |
|
| RHCVA培训 |
|
| RHCDS培训 |
|
| RHCSS培训 |
|
| RHCA培训 |
|
| JBCAA培训 |
|
| JBCD培训 |
|
| OCA 认证专员培训 |
|
| Oracle 10g OCP培训 |
|
| Oracle 10g OCM培训 |
|
| H3CNA培训 |
|
| H3CNE培训 |
|
| H3CSE培训 |
|
| H3CTE培训 |
|
| H3CIE Routing&Switching培训 |
|
| BIG-IP培训 |
|
| Firepass培训 |
|
| ARX培训 |
|
| ITIL V3 Foundation培训 |
|
| ITIL V3 Capability培训 |
|
| ITIL V3 Lifecycle培训 |
|
| ITIL V3 Expert培训 |
|
| PMP培训 |
|
| Junos初级专员培训 |
|
| 电信运营商科目SP培训 |
|
| Junos(SEC)培训 |
|
| E系列认证培训 |
|
| 防火墙VPN认证培训 |
|
| 入侵检测与防御IDP培训 |
|
| SSL认证培训 |
|
| WX认证培训 |
|
| 统一接入控制UAC培训 |
|
| 企业路由和交换培训 |
|
| VCP培训 |
|
| VCAP-DCA培训 |
|
| VCAP-DCD培训 |
|
| VCA-DT培训 |
|
| VCP-DT培训 |
|
| 业务连续性/灾难恢复培训 |
|
| 存储技师EMCST培训 |
|
| 存储管理员EMCSA培训 |
|
| 应用开发EMCApD培训 |
|
| 系统管理员EMCSysA培训 |
|
| 产品特定技术培训 |
|
帧中继子接口和流量整形配置
2010-5-17 15:19:00
文章摘要:帧中继子接口和流量整形配置 CCIE分解:帧中继子接口和流量整形（Traffic Shaping）配置 实验说明： R1和R2之间的平均吞吐量较低为了节省开支，我们决定修改与服务提供商签署的合同，将约定信息速率从1.544Mbit/s降低到19.2Mbit/s 实验过程： 第一步：预配置、 R1(config)#int s3/0 R1(config-if)#...
帧中继子接口和流量整形配置
CCIE分解:帧中继子接口和流量整形（Traffic Shaping）配置
实验说明：
R1和R2之间的平均吞吐量较低为了节省开支，我们决定修改与服务提供商签署的合同，将约定信息速率从1.544Mbit/s降低到19.2Mbit/s
实验过程：
第一步：预配置、
R1(config)#int s3/0
R1(config-if)#encapsulation frame-relay
R1(config-if)#no frame-relay inverse-arp
R1(config-if)#no sh
R1(config-if)#end
R1(config)#int s3/0.1 point-to-point //配置为点到点子接口
R1(config-subif)#no sh
R1(config-subif)#ip ad 192.168.12.1 255.255.255.0
R1(config-subif)#no frame-relay inverse-arp //关闭反向ARP
R1(config-subif)#frame-relay interface-dlci 102
R1(config-subif)#exit
R1(config)#router ospf 1
R1(config-router)#net 0.0.0.0 0.0.0.0 area 0
R1(config-router)#exit
R1(config)#int s3/0.2 point-to-point
R1(config-subif)#no sh
R1(config-subif)#no frame-relay inverse-arp
R1(config-subif)#ip ad 192.168.13.1 255.255.255.0
R1(config-subif)#no sh
R1(config-subif)#frame-relay interface-dlci 103
R2(config)#int s3/0
R2(config-if)#encapsulation frame-relay
R2(config-if)#ip ad 192.168.12.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#frame-relay map ip 192.168.12.1 201 broadcast
R2(config-if)#exit
R2(config)#router ospf 1
R2(config-router)#net 0.0.0.0 0.0.0.0 area 0
R2(config-router)#exit
R2(config)#int s3/0
R2(config-if)#ip ospf network point-to-point
R3(config)#int s3/0
R3(config-if)#no sh
R3(config-if)#encapsulation frame-relay
R3(config-if)#no frame-relay inverse-arp
R3(config-if)#ip ad 192.168.13.3 255.255.255.0
R3(config-if)#no sh
R3(config-if)#frame-relay map ip 192.168.13.1 301 b
R3(config-if)#exit
R3(config)#router ospf 1
R3(config-router)#net 0.0.0.0 0.0.0.0 area 0
R3(config-router)#exit
R3(config)#int s3/0
R3(config-if)#ip ospf network point-to-point
实验过程：
第一步在R1 进行流量整形
R1(config)#map-class frame-relay CIR
R1(config-map-class)#frame-relay traffic-rate 19200
R1(config-map-class)#exit
R1(config)#int s3/0
R1(config-if)#frame-relay traffic-shaping
R1(config-if)#int s3/0.1
R1(config-subif)#frame-relay class CIR
R1(config-subif)#int s3/0.2
R1(config-subif)#frame-relay class CIR
第二步：在R2上进行流量整形。
R2(config)#map-class frame-relay CIR
R2(config-map-class)#frame-relay traffic-rate 19200
R2(config-map-class)#exit
R2(config)#int s3/0
R2(config-if)#frame-relay class CIR
第三步：查看更为详细的流量整流的统计结果
R1#show frame pvc 102
PVC Statistics for interface Serial3/0 (Frame Relay DTE)
DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial3/0.1
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:50:40, last time pvc status changed 00:50:40
cir 19200 bc 19200 be 0 byte limit 300 interval 125
mincir 9600 byte increment 300 Adaptive Shaping none
pkts 0 bytes 0 pkts delayed 0 bytes delayed 0
shaping inactive
traffic shaping drops 0
Queueing strategy: fifo
Output queue 0/40, 0 drop, 0 dequeued
R2#show frame pvc 201
PVC Statistics for interface Serial3/0 (Frame Relay DTE)
DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial3/0
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:49:50, last time pvc status changed 00:49:37
| 上一篇:常见局域网拓扑及网络系统应用 |
| 下一篇:主机备份路由协议HSRP的配置 |
文章摘要:主机备份路由协议HSRP的配置 热备份路由协议是HSRP(Hot standby router protocol)是cisco平台所特有的一种技术，它确保了当网络边缘设备或接入链路出现故障时，用户通信迅速并透明地恢复，并以此为IP网络提供冗余性，通过应用HSRP，可使网络的正常运行时间接近100%，从而满足用户对网络可靠性的要求。 热备份路由协议为IP我网络提供了容错和增强的路由选择功能。通过使用同一个虚拟IP地址和虚拟MAC地址，L...